Lektro-Tech, a dba of Corrosion Protection & Solutions

Manufacturer of Lubrication / Anti-Corrosion Products

 

Home

Servicing Bombardier Aerospace

CORROSION INHIBITIVE LUBE

We Salute Our Services

F16 CORROSION PREVENTION

Super Corr ( A or B)

Application / Uses

SC A & B Interchangable

"A Better Lubricant", An Article By Navy Currents Magazine

MSDS Super Corr-A

MSDS Super Corr-B

Info / Applications

Super Corr-C

For Super Corr-C MSDS

NEW PRODUCT PAGE

Salt Neutralizer

Wood and Metal Protector

General Odor Neutralizer

Government Orders

Acknowledgements

MATERIAL SAFETY DATA SHEET

Revision Version AA   Issue Date:  May 15, 2006

1.       PRODUCT AND COMPANY IDENTIFICATION:

a.        Product Name: SUPER CORR – A

b.        Product Type:   AEROSOL CANS

c.        Military Specification:   MIL-L-87177A, Type I, Grade B

d.        NSN#:  6850-01-528-0653    (LEKTRO-TECH Internal Part Number # 12-351)

e.        Product General Use:  Anti-Corrosion Lubricant

f.        General Description:    Non-Flammable, Hydrophobic , Corrosion Preventive Compound

g.        Formula: Proprietary

h.        Manufacturer: Lektro-Tech, 4556 S. Manhattan Ave Ste L, Tampa, Fl 33611

i.          Contact: Ph: 813-831-4006; Fax: 813-831-1238;  e-mail: admin@lektrotech.com; www.lektrotech.com

j.          Supplier: Same

k.        Form No: 7989299

2.        COMPOSITION / INFORMATION ON INGREDIENTS:

ChemiCC     Chemical Name                                           Cas #          % Wt      313/Chem  Skin  Carcinogen  Pel            TWA/TLV

3,3-Dichloro-1,1,12,2-Pentafluoropropane                       422-56-0       20-40       NO        NO      NO              N /E               443 ppm

1,3-Dichloro-1,1,2,2,3-Pentafluoropropane                     507-55-1        20-40       NO       NO       NO             N/E                222 ppm               

Cyclohexane                                                                      110-82-7        01-10       NO      NO       NO             300 ppm        300 ppm

Hxygenated Hydrocarbon                                                     **               01-05       NO      NO       NO              N/E                     N/E

Carbon Dioxide                                                                 124-38-9         01-05       NO      NO       NO              10,000 ppm   10,000 ppm

** No CAS #: Proprietary Non-Hazardous Ingredients

Note 1 - This product does not contain any CFCs

[ N/A= Not applicable     N/E = Not Established     N/D = Not Determined   < = Less Than     > =  More Then ]        

3.        HAZARDS INDENTIFICATION: This product complies with OSHA’s Hazard Communication Standard (29-CFR 1910.1200) : Potential Health Effects:   Inhaled:  Inhalation of high concentrations of vapor/mist may cause irritation of nasal and respiratory passages. Abusive or excessive inhalation may cause irritation to the upper respirator tract, dizziness, nausea and other central nervous system effects; Skin Contract:  Frequent or prolonged contact may cause irritation; Eye:  the compound may cause irritation; Ingestion: May cause gastrointestinal irritation, nausea, vomiting and diarrhea, Aspiration of compound into the lungs can cause chemical pneumonitis, Minimal toxicity.

4.        FIRST AID MEASURES:   Inhalation:  Remove to fresh air.  Seek medical attention immediately. If breathing stops give artificial respiration.; EYE: Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open. If irritation persists get medical attention immediately; SKIN: wash with soap and water. If irritation persists seek medical attention, Ingestion: not induce vomiting. Seek medical attention immediately.         

5.       FIRE FIGHTING MEASURES:   Flash point:  (of Concentrate Only): NONE ;   Flammable Limits: (as per USA Flame Projection Test) – Non-Flammable Spray ;  Auto-Ignition temperature: N / D;  Suitable Extinguishing media: Dry Chemicals, Foam, CO2 ;  Unsuitable Extinguishing media: NONE ;  Protective Equipment: Wear self-contained breathing apparatus, protective  clothing.;  Unusual Fire and Explosion Hazards: Exposure above 120°F as aerosol can burst. Cool fire exposed containers to prevent rupturing.

6.        ACCIDENTAL RELEASE MEASURES:  Personal Precautions: Avoid direct contact with eyes; Minimize contact with skin. Do not breathe mists, aerosols; Personal Protection: No special equipment needed if used in accordance with label directions. ;  Environmental Precautions: Wash  area to avoid slipping, no special precautions needed;  Clean-up methods – small spillage: Maintain local exhaust and adequate ventilation. No smoking. Keep sparks, heat sources and open flame away from spill or leak. Cover with absorbent material and sweep up.  Wash area to prevent slipping.  Dispose of soaked absorbent material in accordance with local laws. No additional cleaning should be required;  Clean-up Methods – Large Spillage: Same as above;·          Waste Disposal Method: When empty and depressurized through normal use or other causes, pose no disposal hazard and should be recycled. Consult local laws for approved procedures of disposing of steel cans.   

7.        HANDLING AND STORAGE:  Handling: Use with sufficient ventilation to keep employee exposure below recommended limits. Provide adequate ventilation for  handling. KEEP OUT OF REACH OF CHILDREN. Intended primarily for Industrial and Institutional use; Storage:  Material is Stable   Provide adequate ventilation for storage.  Store in a cool dry area, away from heat,open flame, below 120°F

8.    EXPOSURE CONTROLS AND PERSONAL PROTECTION:  Exposure : None Established; Exposure Limits:  None Established; Respiratory Protection’: Not normally required.  If risk of inhalation of  direct mist, wear half mask respirator with organic vapour cartridge and built-in particulate filter NPF (gas only);  Clothing / Gloves: Standard work cloths and shoes. Optional chemical resistant gloves if desired; Eye Protection: None required. Optional mono-safety goggles/glasses if desired;  Work / Hygienic Practices:  Standard work cloths and shoes. Normal self -hygienic wash practices acceptable; Standard work cloths and shoes.:Normal self -hygienic wash practices acceptable; Sdard work cloths and shoes. Normal self -hygienic wash practices acceptable

9.    PHYSICAL PROPERTIES:    (Data In Concentrate Only) Appearance and Odor: Clear colorless liquid. Ether-like odor; Flash Point Method: ASTM D-1310-67 and ASTM D-56-82; Upper Explosive Limit: (volume % in air) 7.6; Freezing point: -218 degree F; Vapor Pressure of can: (air=1):0.0569 Mpa @ 37.8C; Partition coefficient: n=octanol/wateer: 2.75; Total VOC% ,15%(0.8614 lbs/gallon nominal); Solubility in water: (weight%)0.17%@77 Degree F at vapor presssure of the compound; Boiling Point: 54C; Lower Explosive Limits:(volume % in air) 5; Auto-Ignition Temperature: N/D; Specifice Gravity:(H2O=1):@75 degreeF:1.32; Ph Value: Neutral; Decomposition Temperature: 550 degree F; Evaporation rate(Diethyl ether=1): 0.72 

10.  STABILITY / REACTIVITY: Stability: Stable;  Conditions to avoid:  Avoid concentrate open flames and high temperatures.for safety;  product is non-flammable with a zero flash point; Materials to avoid: Avoid contact with strong oxidizing agents, elemental levels of Zinc, Aluminum, Magnesium and other reactive metals;  Hazardous decomposition products:  Hydrogen Chloride, Hydrogen Fluoride and Chlorine;  Hazardous Polymerization:  Will not occur.

11. TOXICOLOGICAL INFORMATION:  Basis for Assesment:  Information given is based on product data, a knowledge of the components and the toxicology of similar products;  Acute Toxicity Oral:  Non-toxic >5g/Kg bodyweight ; Acute Toxicity Dermal: Albino Rats (Sprague-Dawley) 4 hr LC50 …………62,000 ppm ; Acute Toxicity Inhalation:  Albino Rats (Sprague Dawley) increased cholesterol/Decrease body weight….20,000 ppm NOEL………8,0000 ppm ; Skin Irritation: Not irritating, cool to the skin ; Eye Irritation: Irritation if in direct contact of spray;     Respiratory Irritation: Albino Rats Subchronic, Increase cholesterol/decrease body weight…20,000 ppm ; Skin sensitization: Not irritating,skin reaction for allergenic reactions unknown ;  Other Information: Although this product does not require labeling, prolonged exposure to the skin may  cause irritation and should be avoided. No adverse affects have been found and data from acute toxicity studies indicate a very low acute toxicity.

12. ECOLOGICAL INFORMATION: Biodegradability: Minimal ; Toxic: Moderately toxic on Daphnia and Fish – 31.2 mg/L – 126 mg/L; algae, not toxic up to 44 mg/L;  Octanol water partition coefficient: Log P ow = 2.3

13. DISPOSAL CONSIDERATIONS:  Waste Disposal:  Recover or recycle if possible. Otherwise dispose to licensed disposal contractor; Product Disposal: Recover or recycle if possible.  Otherwise dispose to licensed disposal contractor;  Container Disposal: Drain container thoroughly.  Send empty cans to metal reclaimer.

14. TRANSPORTATION INFORMATION:  NAFTA Ground : Consumer Commodity ORM-D;  NAFTA AIR: Consumer Commodity ORM-D-AIR;  IATA Ground: IATA Consumer Commodity ; IATA Air: IATA Consumer Commodity;  Hazardous Material Description: N/A  See Section 1 & 2.; Proper Shipping Names: See Section 1

15. REGULATORY INFORMATION:  TCSA: Listed ; NESHAP: Listed ; RCRA: Listed ; HAP: Listed ; SARA:  Listed See CAS number section 2 ;  CERCLA: Listed ; California Proposition 65: Listed; SNAP: Approved, listed, exempt for Aviation, Military, NATO until existing supply exhausted;  VOC: Listed ; EEC (EINECS): Listed ;  Canada (DSL): Listed ; Japan (MITI): Listed ;  Australia (AICS): Listed;     South Korea (ECL): Listed ;  Other: The use of 141B portion used in this product as a carrier solvent is exempt for application on Aviation and military to include NATO until existing inventory is exhausted at which time the pass thru replacement approved solvent AK225 will be used.

16. OTHER INFORMATION: Hmis Rating (Based on Conc.) 0=minimal, 1=slight, 2=moderate, 3=serious, 4=Extreme; HMIS Rated: Health=2; Fire=0; Reactivity=0; Personal Protection=B

This information is accurate to the best knowledge of Corrosion Protection & Solutions dba Lektro-Tech, and is offered as a guide to the safe use of this product. The information contained in this material Safety Data Sheet is furnished without warranty of any kind, express or implied, and relates only to the specific material designated herein.  Lektro-Tech assumes no responsibility for use or reliance on this data and assumes no liability for damages to the use or misuse of this product.  The user is responsible for determining the conditions of safe use of this product and for complying with all Federal, State, Local and International laws and regulations.

 


Lektro-Tech is a dba company of Corrosion Protection & Solutions LLC, a small veteran owned business