Application / Uses

SC A & B Interchangable

"A Better Lubricant", An Article By Navy Currents Magazine

MSDS Super Corr-A

MSDS Super Corr-B

Info / Applications

    

MATERIAL SAFETY DATA  /  Version 4  / Changed:  June 20, 2006 2006 

a. Product Name:          SUPER CORR – B

b. Product Number:       12-350 

c. Military Specification: MIL-L-87177A, Type 1, Grade B

d. National Stock No#:   PENDING

e. Product General Use: Anti-Corrosion Lubricant

f. General Description:    Non-Flammable, Hydrophobic, Corrosion Preventive Compound

g. Formula: Proprietary

h. Manufacturer: Lektro-Tech; 4556 South Manhattan Ave, Suite L, Tampa, Fl 33611

i.  Contact: ph- 813-831-4006, fax-813831-1238, e-mail: admin@lektrotech.com, www.lektrotech.com

j.  Supplier: Same

k. Emergency 24 hr. No# 1-800-255-3924 

2. COMPOSITION / INFORMATION ON INGREDIENTS:

Chemical Name                                         Cas #        % Wt      313/Chem      Skin     Carcinogen              Pel             TWA/TLV

3,3-Dichloro-1,1,12,2-Pentafluoropropane     422-56-0       2 0-40        NO               NO        NO                  N/E             443 ppm

1,3-Dichloro-1,1,2,3-Pentafluorpropropane   507-55-1       20-40         NO              NO         NO                   N/E            222 ppm  

Cyclohexane                                                 110-82-7        01-10        NO             NO         NO               300 ppm          300  ppm   

Oxygenated Hydrocarbon                                **                 01-05      NO                NO        NO                    N/E               N/E

Carbon Dioxide Propellant                            124-38-9        01-05       NO             NO        NO                 10.000 ppm  10.000 ppm

** No CAS #: Proprietary Non-Hazardous Ingredients

Note 1 - This product does not contain any CFCs

[N/A= Not applicable     N/E = Not Established     N/D = Not Determined   < = Less Than     > =  More Then ]    

___________________________________________________________________________________________

3. HAZARDS INDENTIFICATION:  This product complies with OSHA’s Hazard Communication Standard (29-CFR 1910.1200) Potential Health Effects: Inhaled:  Inhalation of high concentrations of vapor/mist may cause irritation of nasal and respiratory passages. Abusive or excessive inhalation may cause irritation to the upper respirator tract, dizziness, nausea and other central nervous system effects. Skin Contract:  Frequent or prolonged contact may cause irritation. Eye: The compound may cause irritation Ingestion: May cause gastrointestinal irritation, nausea, vomiting and diarrhea, Aspiration of compound into the lungs can cause chemical pneumonitis, Toxicity: Minimal toxicity.

4 FIRST AID MEASURES: Inhalation:  Remove to fresh air.  Seek medical attention immediately. If breathing stops give artificial respiration. EYE: Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open.  if irtation persists get medical attention immediately. SKIN: wash with soap and water. If irritation persists seek medical attention. INGESTION: Do not induce vomiting. Seek medical attention immediately.    

5.FIRE FIGHTING MEASURES: ·Flash Point (of Concentrate Only): NONE ·  Flammable Limits: (as per USA Flame Projection Test) – Non-Flammable Spray ·  Auto-Ignition Temperature: N / D · Suitable Extinguishing Media: Dry Chemicals, Foam, CO2 ·  Unsuitable Extinguishing Media: NONE ·  Protective Equipment: Wear self-contained breathing apparatus, protective clothing. · Unusual Fire and Explosion Hazards: Exposure above 120°F as aerosol can burst. Cool fire exposed containers to prevent rupturing.

6.ACCIDENTAL RELEASE MEASURES: ·Personal Precautions: Avoid direct contact with eyes. Minimize contact with skin. Do not breathe mists, aerosols. ·Personal Protection: No special equipment needed if used in accordance with label directions. ·Environmental Precautions: Wash area to avoid slipping, no special precautions needed. ·Clean-up methods small spillage: Allow propellant and solvent to evaporate. Maintain local exhaust and adequate ventilation. No smoking. Keep sparks; heat sources and open flame away from spill or leak. Cover with absorbent material and sweep up.  Wash area to prevent slipping.  Dispose of soaked absorbent material in accordance with local laws. No additional cleaning should be required. ·Large Spillage: Same as above.  ·Waste Disposal Method: Aerosol cans, when empty and depressurized through normal use or other causes, pose no disposal hazard and should be recycled. Consult local laws for approved procedures of disposing of steel cans. 

7 HANDLING AND STORAGE: ·Handling: Use with sufficient ventilation to keep employee exposure below recommended limits. Provide adequate ventilation for  handling. ·KEEP OUT OF REACH OF CHILDREN. Intended primarily for Industrial and Institutional use. · Storage:  Material is Stable  Provide adequate ventilation for storage.  Store in a cool dry area, away from heat,open flame, below 120°F ·NFPA Code 30B Rating:  Level 1 Aerosol

8.EXPOSURE CONTROLS AND PERSONAL PROTECTION: ·  Exposure: None Established · Exposure Limits: None Established ·Respiratory Protection: Not normally required.  If risk of inhalation of  aerosol / direct mist, wear half mask respirator with organic vapor cartridge and built-in particulate filter NPF (gas only) ·  Clothing / Gloves: Standard work cloths and shoes. Optional chemical resistant gloves if desired. ·Eye Protection: None required. Optional mono-safety goggles/glasses if desired. ·Work / Hygienic Practices:  Standard work cloths and shoes. Normal self -hygienic wash practices acceptable.

9. PHYSICAL PROPERTIES: (Data Is In Concentrate Only) -Appearance and Odor:  Clear colorless liquid.  Ether-like odor.; Boiling Point:  ~ 90°F; Flash Point:  None  ( Flash Point Method: ASTM D-1310-67 and ASTM D-56-82 ) ; Lower Explosive Limits: (volume % in air) 5 ; Upper Explosive Limit:  ( volume % in air) 7.6 ;Auto-ignition Temperature:  N/D ; Freezing point:  -218°F ; Specific Gravity: (H20=1): @75°F :1.230 ; Vapor Pressure of can : (Air=1): >1 ; (psig @ 70°F): 80 ; Ph Value:  Neutral ; Partition coefficient: n-octanol / water: 2.75 ;Decomposition Temperature:  550°F Total VOC%: <15%  (.8614 lbs. per gallon nominally) ; Evaporation Rate: (Diethyl ether=1): 0.72 : Solubility in water: (weight %) 0.17% @ 77°F at the vapor pressure of the compound

10. STABILITY / REACTIVITY : ·Stability: Stable ; ·Conditions to avoid:  Avoid open flames and high temperatures due to the nature of aerosol C02 pressurized can and not the contents of the product. ;·Materials to avoid: Avoid contact with strong oxidizing agents, elemental levels of Zinc, Aluminum, Magnesium and other reactive metals ; ·Hazardous decomposition products:  Carbon Dioxide, Carbon Monoxide, Hydrogen Chloride, Hydrogen Fluoride and Chlorine. ·Hazardous Polymerization:  Will not occur.

11. TOXICOLOGICAL INFORMATION: ·Basis for Assessment:  Information given is based on product data, knowledge of the components and the toxicology of similar products. ;·Acute Toxicity Oral:  Non-toxic >5g/Kg bodyweight ; ·Acute Toxicity Dermal: Albino Rats (Sprague-Dawley) 4 hr LC50 …………62,000 ppm ; ·Acute Toxicity Inhalation:  Albino Rats (Sprague Dawley) increased cholesterol/Decrease body weight….8,000 ppm NOEL………8,0000 ppm ; ·Skin Irritation: Not irritating, cool to the skin ; ·Eye Irritation: Irritation if in direct contact of spray ; ·Respiratory Irritation: Albino Rats Sub chronic, Increase cholesterol/decrease body weight…20,000 ppm ; ·Skin sensitization: Not irritating,skin reaction for allergenic reactions unknown ; ·Other Information: Although this product does not require labeling, prolonged exposure to the skin may cause irritation and should be avoided. No adverse affects have been found and data from acute toxicity studies indicate a very low acute toxicity.

12. ECOLOGICAL INFORMATION: ·Biodegradability: – Minimal ; ·Toxic: Moderately toxic on Daphnia and Fish – 31.2 mg/L – 126 mg/L; algae, not toxic up to 44 mg/L ; ·Octanol water partition coefficient: Log P ow = 2.3

13. DISPOSAL CONSIDERATIONS: ·Waste Disposal:  Recover or recycle if possible. Otherwise dispose to licensed disposal contractor. ; Product Disposal: Recover or recycle if possible.  Otherwise dispose to licensed disposal contractor. ; ·Container Disposal: Drain container thoroughly.  Send empty cans to metal re-claimer.

14. TRANSPORTATION INFORMATION: NAFTA Ground: Consumer Commodity ORM-D ; NAFTA AIR: Consumer Commodity ORM-D-AIR  (aerosol cans under CO2 pressure only) ; IATA Ground: IATA Consumer Commodity Class 9, ID 8000, Packing Inst. 910 ; IATA Air:: IATA Consumer Commodity Class 9, ID 8000, Packing Inst. 910 ; Hazardous Material Description: N/A See Section 1 & 2. ; Proper Shipping Names: See Section 1; Other Notes:  Due to the material packaged in an aerosol metal container under C02 pressure when shipped via air this material is considered HAZMAT.; Actual Product is not considered a HAZMAT material.

15. REGULATORY INFORMATION:  TCSA: Listed ; NESHAP: Listed ; RCRA: Listed ; HAP: Listed ;SARA Listed See CAS number section 2 ; CERCLA: Listed ; California Proposition 65: Listed  ; SNAP: Approved, listed, exempt for Aviation, Military, NATO until existing supply exhausted. ; VOC: Listed ; EEC (EINECS): Listed ; Canada (DSL): Listed ; Japan (MITI): Listed ;  Australia (AICS): Listed ; South Korea (ECL) Listed ; ·Other: The use of 141B portion used in this product as a carrier solvent is exempt for application on Aviation and military to include NATO until existing inventory is exhausted at which time the pass thru replacement approved solvent AK225 will be used.

16. OTHER INFORMATION: Hmis Rating:( Based on Aerosol Conc) 0=minimal, 1=slight, 2=moderate, 3=serious, 4=Extreme ; HMIS Rated: Health=2; Fire=0; Reactivity=0; Personal Protection=B

This information is accurate to the best knowledge of Corrosion Protection & Solutions dba Lektro-Tech, and is offered as a guide to the safe use of this product. The information contained in this material Safety Data Sheet is furnished without warranty of any kind, express or implied, and relates only to the specific material designated herein.  Lektro-Tech assumes no responsibility for use or reliance on this data and assumes no liability for damages to the use or misuse of this product.  The user is responsible for determining the conditions of safe use of this product and for complying with all Federal, State, Local and International laws and regulations.