Lektro-Tech, a dba of Corrosion Protection & Solutions

Manufacturer of Lubrication / Anti-Corrosion Products

 

Home

Servicing Bombardier Aerospace

CORROSION INHIBITIVE LUBE

We Salute Our Services

F16 CORROSION PREVENTION

Super Corr ( A or B)

Application / Uses

Super Corr A Worldwide

"A Better Lubricant", An Article By Navy Currents Magazine

MSDS Super Corr-A

Info / Applications

Super Corr-C

For Super Corr-C MSDS

NEW PRODUCT PAGE

Salt Neutralizer

Wood and Metal Protector

General Odor Neutralizer

Government Orders

Acknowledgements

MATERIAL SAFETY DATA SHEET

COMPLIES WITH OSHA’S HAZARD COMMUNICATION STANDARD (29 CFR 1910.1200)

SECTION I · PRODUCT IDENTIFICATION

Product Name: SUPER CORR-C               Formula: Proprietary                         HMIS Rating (Based on Aerosol Conc.):

Product Number: F812                             Date Prepared: 01/06/03                    0-Minimal      1- Slight      2- Moderate

Product Type: AEROSOL                          Emergency Phone: (800) 255-3924     3- Serious       4- Extreme

Supplier's Name: Lektro-Tech, Inc.           Information Phone: (813) 254-1380    HEALTH: 2  FIRE:  0   REACTIVITY:  0

Supplier's Address: 

4556 S. Manhattan Ave, Suite L, Tampa, FL 33679                  

Date Printed: 05/14/01

Personal Protection: B

D.O.T. Hazard Class: CONSUMER COMMODITY · ORM-D

 

SECTION II · INGREDIENTS   

CHEMICAL NAME              CAS #     %WT    313/Chem     Skin    Carcinogen    PEL         TWA/TLV

1,1 - Dichloro-1-Fluoroethane  1717-00-6    80-100      YES               NO              NO            N/E            N/E

Oxygenated Hydrocarbon         ••             01-05        NO                NO              NO            N/E            N/E

Carbon Dioxide Propellant      124-38-9      01-05        NO                NO              NO            10,000ppm  10,000ppm

•• No CAS#: Proprietary Non-Hazardous Ingredients

 

SECTION III · PHYSICAL DATA

Data Below Based On Aerosol Concentrate Only:

Boiling Point: ~ 90° F

PH: N/A                                                                            Vapor Density (Air=1): >1

Solubility In Water: Slight                                                    Specific Gravity (H2O=1)@75°F: 1.24

Appearance/Odor: Clear Colorless Liquid, Ether-Like Odor

Data Below Based On Total Contents:

Vapor Pressure of can (psig @70°F): 80

Total VOC %:  ~ 3%

 

SECTION IV · FIRE AND EXPLOSION DATA

Flash Point (of Concentrate Only): None to Boiling 

Flammability (as per USA Flame Projection Test): Non-Flammable Spray

Extinguishing Media: Foam, CO2, Dry Media

Special Fire Fighting Procedures: Wear self-contained breathing apparatus and protective clothing. Cool fire exposed containers to prevent rupturing.

Unusual Fire and Explosion Hazards: Exposure to temperature above 120° F may cause bursting.

 

SECTION V · REACTIVITY DATA

Stability: Material Stable.                             Hazardous Polymerization: Will not occur.

Incompatibility: Avoid contact with strong oxidizing agents,

Hazardous Decomposition Products: Carbon Dioxide, Carbon Monoxide, Hydrogen Chloride, Hydrogen Fluoride and Chlorine.

SECTION VI · STORAGE AND HANDLING

KEEP OUT OF REACH OF CHILDREN.

For Industrial and Institutional use only.

Store in a cool, dry area away from heat or open flame.

Do not store at temperatures above 120° F.                             NFPA Code 30B Rating: Level 1 Aerosol.

 

SECTION VII · HEALTH AND FIRST AID

PRIMARY ROUTES OF ENTRY & EFFECTS OF OVER EXPOSURE:

Eyes: May cause slight irritation but does not injure eye tissue.

Skin: Frequent or prolonged contact may cause irritation.

Inhalation: Inhalation of mist can cause irritation of nasal and respiratory passages. Abusive or excessive inhalation may cause irritation to the upper respiratory tract, dizziness, nausea and other central nervous system effects.

Ingestion: Can cause gastrointestinal irritation, nausea, vomiting and diarrhea. Aspiration of material into the lungs can cause chemical pneumonitis.

FIRST AID PROCEDURES:

Eyes: Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open. If irritation persists get medical attention immediately.

Skin: Wash with soap and water. If irritation persists seek medical attention.

Inhalation: Remove to fresh air. Seek medical attention immediately. If breathing stops give artificial respiration.

Ingestion: Do not induce vomiting. Seek medical attention immediately.

 

SECTION VIII · SPECIAL PROTECTION DATA

Respiratory Protection: None needed for proper use in accordance with label directions.

Ventilation: Provide local exhaust to keep TLV of Section II ingredients below acceptable limits.

Protective Gloves: None needed for proper use in accordance with label directions. Use chemical resistant gloves if hand contact will be made.

Eye Protection: None needed unless it is anticipated that a splash or spray back will occur, then wear safety glasses or chemical proof goggles.

 

SECTION IX · SPILL OR LEAK PROTECTION

STEPS TO BE TAKEN IN CASE OF SPILL OR LEAK: Allow propellant and solvent to evaporate. Maintain local exhaust and adequate ventilation. No smoking. Keep sparks, heat sources and open flame far away from spill or leak. No additional cleaning should be required.

WASTE DISPOSAL METHOD: Aerosol cans, when emptied and depressurized through normal use, pose no disposal hazard and should be recycled. Consult Federal, State and local authorities for approved procedures.

 

N/A= NOT APPLICABLE   ·   N/E=NOT ESTABLISHED   ·   N/D=NOT DETERMINED   ·   <=LESS THAN   ·   >=MORE THAN

 

NOTICE: The information contained on this Material Safety Data Sheet is considered accurate as of the date of publication. It is not necessarily all inclusive nor fully adequate in every circumstance. The suggestions should not be confused with, nor followed in violation of applicable laws, regulations, rules or insurance requirements. No warranty, express or implied, of merchantability, fitness, accuracy of data, or the results to be obtained from the use thereof is made. The vendor assumes no responsibility for injury or damages resulting from the inappropriate use of this product.

 


Lektro-Tech is a dba company of Corrosion Protection & Solutions LLC, a small veteran owned business